The Significance Of Quality Control To The Attainment Of Corporate Objectives In Manufacturing Company

Project and Seminar Material for Business Administration and Management BAM

The Significance Of Quality Control To The Attainment Of Corporate Objectives In Manufacturing Company


Proposal


This project topic centers an assessment of the impact of quality control to the attainment of cooperate objectives of manufacturing companies with a specific reference to Doyin investment Nigeria Limited, Ilorin. The significance of quality control to the attainment of cooperate objective of manufacturing companies cannot be over-emphasized. The project consists of five chapters as following.

  • Chapter one of this project consist of introduction, historical background of Doyin investment Ltd, statement of the research problems, objectives of the study, significance of the study, scope of the study, limitation of the study, definition of terms.
  • Chapter two consists of the literature review.
  • Chapter three discuss about research methodology, research design used sources of data, instruments used for data collection, research population and sample size, sampling procedure employed, statistical techniques used in analyzing data,
  • Chapter four deals with data presentation and analysis.
  • Chapter five gives the summary of findings, conclusion, recommendations and references.

Table of Content


  • Title page
  • Certification
  • Dedication
  • Acknowledgement
  • Proposal
  • Table of content

Chapter One:

Introduction

  • 1.1 General Introduction
  • 1.2 Historical Background of Doyin Investment Nig. Ltd
  • 1.3 Statements of Problems
  • 1.4 Objectives of the Study
  • 1.5 Significance of the Study
  • 1.6 Scope of the Study
  • 1.7 Limitations and Constraints to the Study
  • 1.8 Definition of Terms

Chapter Two

2.0 Literature Review


Chapter Three

3.0 Research Methodology

  • 3.1 Research approach
  • 3.2 Source of Data
  • 3.3 Instruments Used For Data Collection
  • 3.4 Research Population and Sample Size
  • 35 Sampling Procedure Employed
  • 3.6 Techniques Used in Analysis of Data

Chapter Four

4.0 Presentation and Analysis of Data


Chapter Five

5.0 Summary of Findings, Conclusions and Recommendations

  • 5.1 Summary of Findings
  • 5.2 Conclusions
  • 5.3 Recommendations
  • References
  • Appendix
  • Questionnaire

Chapter One


Introduction

1.1 General Introduction

It is important to note that quality control is an important function.

It is so vital that it helps an organization to have competitive edge over the competitors in the market.

A company can conveniently through quality has effective quality policy out-sales competitors’ product in the market.

When we talk about “quality” the definition most people have in mind is “high quality” which is something describable concept, the word is Item used to mean superior quality, but from purchasing angle the acceptable definition of quality is “totality of feature and characteristics of product or service that bear on its- ability to satisfy a given purpose.

“Quality control” in purchasing angle means regulating manufacturing process in order to maintain the required quality.

The management executive is in an excellent position of their company’s profit that originates in the area of quality. The researcher is interested in the topic, because quality is everybody’s focus in an organization.


1.2 Historical Background of Doyin Investment Niger1A Limited.

Doyin investment company formal known as the Global Soap and Detergent Industry limited incorporated in October 1984 under the commerce and industry act in 1986 the company is situated along Asa-Dam Road in Ilorin West Local Government in Kwara State and the company specialized in production of soap, extra power flash, clean and wash rite.

In 1985, all the plants were received into the site and the process of installation commence immediately. The commissioning of the industry was done towards the end of the year 1985, the Global Soap and Detergent industry is an affiliate of Doyin Group of Companies” which has it head office at Lagos, the man Doyin himself is an indigene of Kwara state and the name of his home town is “Agbamu” he sited the industry in the state capital so as to reduce unemployment in the state and outside the state.

Some of the materials used in producing are imported materials but a lot of research is going on as for them to make use of local material and such materials used include the following: blank crop, sodium syndicate etc based on what is written down there is need to look into the organizational structure.

The organizational structure of Global Soap and Detergent can be said a situation where subordinates are responsible to their superior officers. The top on the list is the General Manager and he is the head of the industry and the sole responsibility of the whole operations rests on lam, he gives order on any important issue e.g. may be there is need to purchase capital requirement or if they are to buy large quantity of material involving huge amount of money after the general manager comes the technical manager under the technical manager is engineering and administration, the technical stores, packaging and the clerks.

The production manager also comes under the general manager and the report directly to him, under the production, manager, we have

The raw material stores, followed by purchasing store supervisor, clerks and the cleaners in the raw material store, the component of raw materials kept there are:

  1. STPP (Sodio Tropoli Fops tap)
  2. Sodium syndicate
  3. Glue
  4. Blank cap
  5. Blue dye
  6. Perfume

All these materials are kept in the raw materials store until they are needed, The STPP (SodioTropoli Fopsta (O) is in a separate tank with we provision of tap as they are being dissolved by water, some is passed to the next machine were the operations starts. The sodium syndicate used to neutralize the acid of the detergent during the production Glue, Blank Crop and caustic soda also part of the raw materials used for production of the detergent and during this period the detergent is in white colour, the blue dye white colour to blue and what is how it goes for other soaps and detergent they produce. At the final stage the perfume is mixed and it makes the detergent to give a passive odour.

Also under the General Managers is the quality Control and under him, we have the preliminary design and under the design comes the supervisor, the clerks and security. The quality control manager in collaboration with design and engineering department works on how chemical should be used, the system of packing, packaging, what type of colour that will attract the customers, the dimension and hardness so that it does not get spoilt any how. The quality control manager also hare some link with the production department which have the purchasing under the department and the area of how the right quality or materials purchased for organization.

Another department that comes under the general manager is the finance department, the finance manager report directly to the general manager on the financial aspect of the organization. The financial department receives all relevant documents from store such as Good receive which will note, all the document connected with purchase of materials which will used in preparing the final budget of the organization.

Lastly, we have marketing manager he also comes under the manager and he report directly to him in area of promotion, market research, sales etc. The marketing managers have under him market research internal and it section, sales and administration and clerks most of the decisions taken in the organization comes from the management and information is passed based on superior subordinate.

The organization chart of Global Soap and Detergent industry is shown below

ORGANIZATION CHART DOYIN INVESTMENT NIGERIA LIMITED ILORIN


1.3 Statement of the Problems

Quality control system is important in every organization but when there is poor inefficient quality control system, it result into low profit level and growth.

Another problem encounter is that there is no proper provision for inspection department; these departments are to be responsible for the inspection of the product and to see that they are set up to the required standard, including the method of ratting vendor for quality.

Scanty of staff in the organization whereby one staff will be entrusted with lot of responsibility and this will lead to poor inspection and the company will be at loss. The researcher will also look into some of the problems and look for ways of solving them.


1.4 Objectives of the Study

This research work has been carried out to establish the significant of quality control in industrial establishment with a specific reference w Doyin Investment Company Nigeria Limited.

The primary objectives of this study is to enable the researcher to fulfill one of the basic requirements for the award of National Diploma in purchasing and supply awarded by the purchasing and supply department, institute of

Finance and Managements Studies, Kwara State polytechnic, Ilorin.

The project is also aim of exposing the importance of quality control to the attainment of corporate objectives.


1.5 Significance of the Study

The motive behind this research is in partial fulfillment of the requirement for the award of National Diploma in Purchasing and supply, Institute of Finance and Management studies, Kwara State Polytechnic, Ilorin.

The aim of the researcher as far as quality control is concerned is to use this project work to be of greatly contribute to the companies that are concerned with the matter. It is also belief that society at large would find the research useful, the professional purchasing personnel, material management student as well as others. The future researcher would be find useful information in the project.


1.6 Scope of the Study

This research work will look into the following:

Quality control concept, determination of quality, who determines quality, contributions of purchasing to quality control, etc.

As the project will mainly focus on Doyin Investment Nigeria Ltd Ilorin, so it is applicable to every other manufacturing company in the world. It covers the review of literature and textbooks technologies used in the project work.


1.7 Limitations of the Study

The limitation and constraints of the study includes the following:

Financial Constraints:

This is one of the factors that unit the research work. This was done to the fact that the cost of conducting any research nowadays is enormous. This includes the cost of transportation, cost of paper work, the cost of getting material related to the research work etc.

Time:

The researcher had to apportion his limited time between academic work and research work. This whole process is demanding the researcher has combined the two and other activities.

Respondents:

Here lies the problems of lukewarm attitude of some officials wee were supposed to give reasonable answer were not willing to give it out. Some of the staff felt reluctant to fill the questionnaire given to them

Unwillingness to supply Information:

Finally, a difficulty in getting some vital information relating to the research was another problem. Some document were ignored and undisclosed to the researcher.


1.8 Definition of Terms

Quality:

This is the totality of features and characteristics of a product is services that bear on its ability to satisfy a given purpose or needs

Quality Control:

Regulating manufacturing process in order to maintain the required quality. It is also a system for programming and coordinating the effort of the various groups in the organization to maintain or improve quality at economical level which allow for customer satisfaction.

Inspection:

Is a process of measuring, examining, testing, gaining or otherwise company items with the applicable requirement.

Specification:

Is a detail description in the requirement to which the service must confirm.

Standardization:

The process of reducing the number of verities to a controllable workable minimum.

Obsolescence:

An item is said to be obsolescence when it is going out of use but it is not yet completely unsuitable.

Store:

Is a space set aside or reserve, for holding stock waiting for dispatch to where it is needed. It can also be known as an inventory.


Chapter Five


5.0 Summary of Findings, Conclusions and Recommendations

5.1 Summary of Findings

Doyin Investment Nigeria Limited does not operate in isolation. It can be seen from the course study that the role of quality control in any organization is immense importance to the profitability of that organization. Quality control is concerned with establishment and method used in achieving them. Quality control objectives are preventive and remedial quality checks during the manufacturing process many uncover deviations that can be corrected, while quality checks for the finished production are pure remedial. The ultimate goals of this programme are to reduce the number of delete from finished products to be tolerable minimum.

To establish standard, tolerance are set for every important quality variables on the product, tolerance must satisfy the requirement that customer will impose on the finished goods.


5.1 Conclusion

From the research conducted so far, the researcher would like to include that quality control activities and problems as observed in the company is not very unproductive from the usual system and problems witness elsewhere, in other organizations. It can be organized that the organization has benefited particularly from essence quality standard programme. The objective and continuous development of quality control techniques are designed to contribute to profit of the company.


5.2 Recommendations

From the study conducted so far, the researcher would like to recommend the research materials as ways of improving the quality control standard of the company.

Enough staff should be recruited to the quality control department order to be able to manage the department effectively.

Quality staff should be transferred on privilege to enable them handle effectively the challenges of the job.

The quality control system should be renewed from time to time in the light of change schedule in order to deliver the received and problem facing the organization in the area of quality control.


The Significance Of Quality Control To The Attainment Of Corporate Objectives In Manufacturing Company


Project Material Download

3,000 Naira


The complete material will be sent to you in just 2 steps.

Quick & Simple…


Step One Purchase

Make payment of ₦3,000: through USSD Transfer, Bank Mobile App, ATM Transfer, or POS Transfer to:

Access Bank PlcAccount No.: 0811003731
Name: Samphina Academy
Account Type: Current

Or Click Here to pay with Debit Card

FOR CLIENTS OUTSIDE NIGERIA:
Click Here to pay with Debit Card ($15)
GHANA – Make Payment of 60 GHS to MTN MoMo, 0553978005, Douglas Osabutey 

  PAY WITH CRYPTOCURRENCY


Step Two Purchase

Send the following details through Text Message or WhatsApp Messenger | +234-8143831497

  • Payment Details 
  • Email Address 
  • The Significance Of Quality Control To The Attainment Of Corporate Objectives In Manufacturing Company

The complete material will be sent to your email address after receiving your payment information | T & C Apply


  Contact Our Help Desk


You may also like:

⚠️ Need a different topic? Perform a quick search



Get A Complete Business Plan For Any Business In Nigeria

Business Plan for Businesses in Nigeria

  Business Plans in Nigeria


Disclaimer


This research material “The Significance Of Quality Control To The Attainment Of Corporate Objectives In Manufacturing Company” is for research purposes and should be used as a guide in developing your research project / seminar work. For no reason should you copy word for word (verbatim) as samphina.com.ng will not be liable for any who copied the material.

The aim of providing this material is to reduce the stress of moving from one school library to another all in the name of searching for research materials. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works. According to Austin Kleon “All creative work builds on what came before”.

samphina.com.ng is only providing this material “The Significance Of Quality Control To The Attainment Of Corporate Objectives In Manufacturing Company” as a reference for your research. The paper should be used as a guide or framework for your own paper. The contents of this paper should be able to help you in generating new ideas and thoughts for your own research. Use it as a guidance purpose only.

Samphina Academy

Samphina Academy is an Online Educational Resource Center that is aimed at providing students with quality information and materials to aid them in succeeding in their academic pursuit.