A Project Report On Construction Of Industrial Sieve Compartment

Project and Seminar Material for Chemical Engineering

A Project Report On Construction Of Industrial Sieve Compartment


The construction of Sieve Industrial Sieve Compartment was carried out in the Engineering Workshop, Institute of Management and Technology, Enugu.

The aim of this project is to fabricate an industrial sieve compartment which is capable of separating solid particles of various sizes.

The construction was carried out in order to analyze the sizes of particles.

The component parts of the set of sieve and their dimensions are as follows:

  • Height of sieve – 300mm
  • No of sieve – 4
  • Diameter of sieve – 300mm
  • Shape of sieve – Circular
  • Height of sieve set – 900mm
  • Mesh/hole sizes – top – 6.0mm, 2nd – 5.0mm 3rd – 3.0mm, bottom 1.0mm respectively.

In construction of sieve compartment, some factors were taken into consideration and they are:

  1. The capacity of the sieve
  2. The type of material to be used for constructing sieve
  3. The availability of the material
  4. The type of mixture that can be filtered in it
  5. Cost which is the determinant factor in fabrication of any equipment.

These factors listed helped greatly in completion of this project.

At the end of the fabrication, a sieve equipment was constructed with specified dimensions.

Table Of Contents

  • Title page i
  • Certification page ii
  • Dedication iii
  • Acknowledgement iv
  • Abstract v
  • Table of content

Chapter One:

  • Introduction
  • 1.1 Background of Study
  • 1.2 Statement of Problem
  • 1.3 Purpose/Aims/Objective of the Study
  • 1.4 Scope and Limitation of the Study
  • 1.5 Method of Research
  • 1.6 Significance of the Study

Chapter Two:

  • Literature Review
  • 2.1 History of Sieve
  • 2.2 Theory of Sieve
  • 2.3 Definition of Sieve
  • 2.4 Types of Sieve

Chapter Three

  • Methodology

Chapter Four

  • 4.0 Result / Analysis
  • 4.1 Material Balance on Sieve
  • 4.2 Screen Analysis

Chapter Five

  • Discussion

Chapter Six

  • Conclusion And Recommendation
  • Reference

Chapter One


1.1 Background Of The Study

Generally all Chemical Engineering mostly deals with the construction of sieve among other construction in order to fulfill the theory of separation technique.

Industrial sieve compartment is a kind of machine fabricated to be used in separating solid particles. The sieving equipment works by allowing solid particles of different sizes to pass through the pores or the aperture which consist of orderly, arranged sets of sieves in a manner of the particle sizes and shapes. Basically sieve equipments consist of a set of sieves preferably with the quality of shocker in accordance with its speed range.

The sieve equipment operates best when the solid particles is in their coarse and fine form. The equipment has high sensitive efficiency, but only few have been constructed since the development of separation of particles. This is as a result of the losses incurred and the procedure involved and also the labour needed to clean the sieve plate and to handle the sieve equipment.

However, in the construction of sieve, we have to bear certain qualities in mind to portray such as determination of size and shape of the equipment which contributes to the efficiency of the equipment.

Size separation is a unit operation technique which is often used daily in industries, and our daily lives. Sieving one of the size separation technique that is often needed and therefore sieve is the equipment used, and therefore for effective size separation, there is need for constructing of sieve compartments.

1.2 Statement Of Problems

Before the existence of sieve compartment, there has been a lot of difficulties which one normally face when making or fabricating the equipment. They include; cuttings during cutting, the whole cutted mesh might not be the same.

Coupling – when coupling, the different cutted materials might not exactly fit, but joined using trial and error method. And availability of material is also one of the problems encountered.

1.3 Purpose / Aims / Objectives Of The Study

The main aim of this project is to fabricate or construct a sieve which is the basis of separation of solid particles into different sizes by passing it through mesh and with the assistant of shaking, large particles are retained on the mesh which is referred to as (oversize) and the undersize.

1.4 Method Of Research

The research was done by sourcing information from the library, internet textbooks and from previous or related subjects projects.

Empirical research was also conducted by performing a standard construction of a sieve compartment in the workshop. The apparatus for the construction was set up and carried out with all the precautions strictly adhered to.

1.5 Significance Of The Study

Construction of industrial sieve compartment has played a significance role to mankind and industries. The construction of this work help to carry out effective separation without much problems.

It reduces the physical effort required by an operators, free him from tediously repeated sieving or separation because the sieve is in set and contains a shocker which when plug to the socket, performs the operation or separation on itself.

A Project Report On Construction Of Industrial Sieve Compartment

Project Material Download

3,000 Naira

The complete material will be sent to you in just 2 steps.

Quick & Simple…

Step One Purchase

Make payment of ₦3,000: through USSD Transfer, Bank Mobile App, ATM Transfer, or POS Transfer to:

Access Bank PlcAccount No.: 0811003731
Name: Samphina Academy
Account Type: Current

Or Click Here to pay with Debit Card

Click Here to pay with Debit Card ($15)
GHANA – Make Payment of 60 GHS to MTN MoMo, 0553978005, Douglas Osabutey 


Step Two Purchase

Send the following details through Text Message or WhatsApp Messenger | +234-8143831497

  • Payment Details 
  • Email Address 
  • A Project Report On Construction Of Industrial Sieve Compartment

The complete material will be sent to your email address after receiving your payment information | T & C Apply

  Contact Our Help Desk

You may also like:

⚠️ Need a different topic? Perform a quick search

Get A Complete Business Plan For Any Business In Nigeria

Business Plan for Businesses in Nigeria

  Business Plans in Nigeria

A Project Report On Construction Of Industrial Sieve Compartment


This research material “A Project Report On Construction Of Industrial Sieve Compartment” is for research purposes and should be used as a guide in developing your research project / seminar work. For no reason should you copy word for word (verbatim) as samphina.com.ng will not be liable for any who copied the material.

The aim of providing this material is to reduce the stress of moving from one school library to another all in the name of searching for research materials. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works. According to Austin Kleon “All creative work builds on what came before”.

samphina.com.ng is only providing this material “A Project Report On Construction Of Industrial Sieve Compartment” as a reference for your research. The paper should be used as a guide or framework for your own paper. The contents of this paper should be able to help you in generating new ideas and thoughts for your own research. Use it as a guidance purpose only.

How to defend your research work

This is a general guide on how to defend your research work:

1. Prepare For Questions:

If you are preparing for questions that may be asked during your defense, then your answers will flow smoothly and effectively. This will prove your knowledge on the subject e.g “A Project Report On Construction Of Industrial Sieve Compartment“, and strengthening your argument. Ask friends and family, read your work for them to listen to your presentation, and write down questions. You may be lucky the panel will ask you those you have already prepared on.

2. Strong Summary:

Summarizing your chapters will help keep your audience focused because it is easy for a mind to drift, so providing summaries will ensure your panel will follow along, even if they lose focus for a brief moment. Visual aides, such as graphs and power-point presentations can be very helpful. If you are going to use these, make sure you will practice your presentation with them.

3. Be Confident in Your Research Work:

Not knowing your topic “A Project Report On Construction Of Industrial Sieve Compartment” inside out will cause you to struggle and ultimately fail with your defense. You need to know the subject from every angle to ensure you are fully prepared for any question that may come your way.

4. Conclusion:

Reinforce your findings to conclude your defense. The finale of your presentation should focus on proving the work that has been done. You may need to recap on what has changed and remained unchanged, if is necessary.

5 . Listen:

Before you get defensive or recite a particular answer, make sure you truly understand the question being asked. Being a good listener is an important quality, because providing an inaccurate or off-topic answer will also weaken the validity of your paper.

Samphina Academy

Samphina Academy is an Online Educational Resource Center that is aimed at providing students with quality information and materials to aid them in succeeding in their academic pursuit.