Optimization Of Activated Carbon Preparation From Corncob Wastewater Treatment

Project and Seminar Material for Chemical Engineering

Optimization Of Activated Carbon Preparation From Corncob Wastewater Treatment


Corncob Activated Carbon (AC) was produced via chemical activation with phosphoric acid (H3PO4) for the hydrolysis step and potassium hydroxide (KOH) for the impregnation step. In this work, optimization and development of the model equations for the preparation conditions of AC, Design Expert 6.0.6 Stat-Ease, Inc USA software was used. For the optimization of the AC preparation conditions, a Central Composite Design (CCD) was used to investigate the effect of independent variables on the yield and adsorption capacity of the activated carbon samples. The independent variables used in this work were, phosphoric acid concentration, potassium hydroxide concentration, activation temperature (oC) and activation time (minute).

Response Surface Methodology (RSM) technique was used to optimize the preparation conditions (H3PO4, KOH, temperature and time); with percentage yields of hydrolysate and activated carbon and adsorption capacity of AC as the targeted responses. The optimal conditions for the preparation of AC using CCD software were 358.15 oC, 116.90 minutes, 0.29 mg/l H3PO4, 0.09 mg/l KOH. This set of conditions gave hydrolysate yield of 76.9339 %, while activated carbon yield and Methylene Blue (MB) adsorption capacity were 21.84 % and 1.98 mg/g respectively. The specific surface area of the AC using Sear’s method was 314.2 m2/g. Analysis of Variance (ANOVA) for hydrolysate yield, AC yield and adsorption capacity showed the developed models equations were significant.

The experimental and predicted values of the hydrolysate yield, AC yield and adsorption capacity of adsorbent on adsorbate MB were in close agreement and the correlation coefficients R2-values of 0.9688, 0.9358 and 0.9134. The surface areas of selected ACs were 259.8 m2/g (AC8), 215 m2/g (AC9) and 314.2 m2/g (AC14) gave adsorption capacities of 1.92 gm/g, 1.97 mg/g and 1.98 mg/g of MBrespectively. The Fourier Transform Infra-Red (FTIR) analysis of the AC samples produced showed the presence of O-H, C-H, C-Br, N-H, C-C, C-N, C=C and C≡C functional groups which aid in adsorbing adsorbate onto the adsorbent. Adsorption isotherm data were used to model the following Langmuir and Freundlich isotherms; the adsorption of Chromium ions on the selected AC produced was predicted by Langmuir and Freundlich isotherm models with R2 value of 0.9974 and 0.7691 respectively. The percentage chromium removal increases with increase in adsorbent dosage. The activated carbon samples produced can be effectively used for wastewater treatment.

Chapter One


1.1 Background of Study

Activated Carbon (AC) is a versatile derivative of biomass predominantly amorphous (crystalline) solid that has extra ordinary large internal surface area and pore volume (Jamaludin, 2010). The unique structure of AC gives rise to its application ranges from liquid to gas phase because of their adsorptive properties.

Industrial ACs can be produced from any cheap material with a high carbon content, low inorganics as precursors such as coal, wood, coconut shell, corn cob, almond shells, peach stones, grape seeds, apricot stones, cherry stones, olive stones, peanut hull, nut shells, rice husk, oil palm shells, sugar cane bagasse (Tsai et al., 1997, and 2001; Jamaludin, 2010;

Diya’udeen et al., 2011). Palm shell, rattan, mango stem peel, and corn cob (Mohd et al., 2011); canarium schevein furthii nutshell (and Ajayi and Olawale, 2009), groundnut shells, Palm Kernel shells, coconut shells, bamboo, wood chips, corn cob, seeds and saw dusts (Oloworise, 2006).

AC has been the most popular and widely used adsorbent in liquid and gas treatment throughout the world. Charcoal been the pioneer of AC has been recognized as the oldest adsorbent known in waste water treatment.
AC is produced by a process consisting of raw material dehydration and carbonization followed by activation.

Get Complete Project Material

5,000 5000

The Complete Material Will Be Sent to You in Just 2 Steps

Quick & Simple…

Step One Purchase

Make Payment (Through Transfer) of ₦5,000 to the Account Below

Zenith BankAcc No: 1225513212
Samphina Academy
Current Account

Or CLICK HERE To Pay With Debit Card

CLICK HERE To Purchase Material ($15)

Step Two Purchase

Send the Following Details on WhatsApp ( 08143831497) After Payment

  1. Payment Details

  2. TOPIC: Optimization Of Activated Carbon Preparation From Corncob Wastewater Treatment

The Complete Material Will Be Sent To You On WhatsApp After Receiving Your Details
T & C Apply

  Contact Our Help Desk

Need a Different Topic? Perform a Quick Search

List of Related Works

Click on Any Topic to Preview the Content


Samphina Academy

Samphina Academy is an Online Educational Resource Center that is aimed at providing students with quality information and materials to aid them in succeeding in their academic pursuit.