Investigate The Microbial Content Of Some Bolted Soft Drinks

Project and Seminar Material for Science Laboratory Technology SLT

Investigate The Microbial Content Of Some Bolted Soft Drinks


Abstract


This work was done in order to investigate the microbial content of some bolted soft drivels sold in Enugu interlopes. Soft drink are consumed in large quantities by the different age groups, adult and children of different class of people all over the state. This is aided by the general availability of these drink almost every place roleve people gather for work or recreational activities. It is the appropriate to subject these soft drinks to some kind of

investigation by isolation and characterizing the microorganism found.
Simple Grows staining and biochemical test method were employed to isolate and identify the organisms found different bacterial and feast were identified these organisms include Fvlavobacterium spp. Bacillus Eschericjhism coli, Enteribacter arccosines Micro coccusroseus Micrococcus various Bacillus subtitles Aciuetobacter iwoffi, Micrococcus inteus Bacillus polymea, flavobacterium, rigeuse sacchenomyces, conevisciae klurenomyce sff, Torulopsis spp, cadida valida Geotrichuin candidium, sacchanoyces, carlbergersis cryptococus, albidus, Hausennlsa spp etc.


Chapter One


1.1 Introduction

Soft drinks were defined by Harry and Wilbert (1984) as a class of non alcoholic beverages which may be divided into two classes carbondrate soft drinks some time referred to as Soda ;’soda pop “etc) and still or non- carbondrate soft drinks. soft drinks in general contains 86 to 92% water, 7 to 10% nutrient sweetbriers, carbodioxide (if present) acid and flavoring. The food and drug administration standard of identity for carbonated soft drink define them as a class of beverage made by absorbing carbodiocide in potable water.

The amount of carbonhdioxide used is not less than that which well be absorbed by the beverage at a pressure of one atmosphere and a temperature of 60F. these drinks contain no alcohol, or only such alcohol (not in excess of 0.5% by weight of the finished beverage) as is contributed by the flavoring ingredient that may be use in carbonated soft drinks in such properties are reasonable required to accomplish their intruded effects. These include nutritive sweeteners flavoring ingredient natural and antificial colour additive acidifying agent buffering agent emulsifying stabilizing or viscosity producing agent foaming agent caffeine and chemical preservatives the beginning of the carbonated beverage (soft) drinks) as recorded by Resrosier (1977) date back to the closing years of the eighteen (18th ) century

Morris (1959) defined micro organisms as plant or animal organisms of microscopic or submicroscopic dimensions. Plant microorganisms are generally classified into three major groups, namely fungi bacteria and Algae as for as beverage manfacture is concerned the fungi are the most important group of spoilage organisms because yeast and mould belong to this group. The protozoa are the most important of the animal microorganisms.

Actually individual microorganisms are microscopic in size they can form colonies clouds precipitates sediments and scums with time and these are visible to the naked eyes and are the direct signs of the presence of microorganisms.

The microbiological safety and ratability of the diverse type of soft drinks products depend on their formulation (including) the use of chemical preservative carbonation low PH values and pasteurization) this was stated by ganglion (1982). Batchelor (1985) put it that the inter related environmental factors that determine the microbial load of product or the susceptibility of a product to microbial spoilage are intrinsic and Extrinsic factors.

Intrinsic factor are derived from the product and its formulation according to pauezai comments they are not easy to change Extrinsic factor are variable introduced during processing packaging distribution and storage. They should be easier to change and control. Girighano further recorded that control should be by application of the air Hazard Analysis critical Control point (HACCP) system to raw material formulating processing condition and packaging examples of such control would be :

  1. Measurement of temperature during heat treatment of pasteurized product
  2. Measurement of carbonation level by routine monvtorning of carbendioxide pressures in carbonated products
  3. Measurement of pH water activity product viscosity and preservatives in combination with other formulation parameters
  4. Maintenance of good hygienic practice to prevent the building up of spoilage organisms on the plant equipment and in the production areas.

Most microbiological problem arise because of poor quality of raw material (eg fruit concentrates sugar and syrup) poor processing hygiene packaging material and storage condition and these lead to over coming of the preservation system applied drinking manufactures or production of the beverages (soft drinks) by the micro organisms.


Justification

Soft drink are consumed in large quantities by the massed both male and female cutting across different age group adult and children of different classes of people all oven the state. This is aided by the general availability of these drinks almost every place where people gather for work or recreational activities so it is necessary to let the people taking this soft drinks know the consequences of leaving their drink open there by allowing some microorganisms which grow in the presence of air (acropea or acrophile organisms) to gain their way into the drink. Also for then to know the implicated organism in the soft drink thereby helping them to reduce their soft drink intake.


Aim And Objectives

Aim and objective of this project is to investigation the microbial content of bottled soft drinks by:

  1. Isolating the microorganisms present in them
  2. Identify and characterize the microorganisms present

Hypotheses

H0 Yeast and would are the only organisms implicated and identified in the microbiological charateristion of the three brand of soft drinks.

H1 Yeast and mould are the only organisms implicated and identified in the microbiological characterization of the three brand of soft drink, bacteria were also implicated and identified.


Limitation

This study was limited to Enugu metropolis and three leading and most consumed soft drink this was due to economic and transportation difficulties encountered in the course of the study.


Investigate The Microbial Content Of Some Bolted Soft Drinks


Project Material Download

3,000 Naira


The complete material will be sent to you in just 2 steps.

Quick & Simple…


Step One Purchase

Make payment of ₦3,000: through USSD Transfer, Bank Mobile App, ATM Transfer, or POS Transfer to:

Access Bank PlcAccount No.: 0811003731
Name: Samphina Academy
Account Type: Current

Or Click Here to pay with Debit Card

FOR CLIENTS OUTSIDE NIGERIA:
Click Here to pay with Debit Card ($15)
GHANA – Make Payment of 60 GHS to MTN MoMo, 0553978005, Douglas Osabutey 

  PAY WITH CRYPTOCURRENCY


Step Two Purchase

Send the following details through Text Message or WhatsApp Messenger | +234-8143831497

  • Payment Details 
  • Email Address 
  • Investigate The Microbial Content Of Some Bolted Soft Drinks

The complete material will be sent to your email address after receiving your payment information | T & C Apply


  Contact Our Help Desk


You may also like:

⚠️ Need a different topic? Perform a quick search



Get A Complete Business Plan For Any Business In Nigeria

Business Plan for Businesses in Nigeria

  Business Plans in Nigeria


Investigate The Microbial Content Of Some Bolted Soft Drinks


Disclaimer

This research material “Investigate The Microbial Content Of Some Bolted Soft Drinks” is for research purposes and should be used as a guide in developing your research project / seminar work. For no reason should you copy word for word (verbatim) as samphina.com.ng will not be liable for any who copied the material.

The aim of providing this material is to reduce the stress of moving from one school library to another all in the name of searching for research materials. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works. According to Austin Kleon “All creative work builds on what came before”.

samphina.com.ng is only providing this material “Investigate The Microbial Content Of Some Bolted Soft Drinks” as a reference for your research. The paper should be used as a guide or framework for your own paper. The contents of this paper should be able to help you in generating new ideas and thoughts for your own research. Use it as a guidance purpose only.


How to defend your research work


This is a general guide on how to defend your research work:

1. Prepare For Questions:

If you are preparing for questions that may be asked during your defense, then your answers will flow smoothly and effectively. This will prove your knowledge on the subject e.g “Investigate The Microbial Content Of Some Bolted Soft Drinks“, and strengthening your argument. Ask friends and family, read your work for them to listen to your presentation, and write down questions. You may be lucky the panel will ask you those you have already prepared on.

2. Strong Summary:

Summarizing your chapters will help keep your audience focused because it is easy for a mind to drift, so providing summaries will ensure your panel will follow along, even if they lose focus for a brief moment. Visual aides, such as graphs and power-point presentations can be very helpful. If you are going to use these, make sure you will practice your presentation with them.

3. Be Confident in Your Research Work:

Not knowing your topic “Investigate The Microbial Content Of Some Bolted Soft Drinks” inside out will cause you to struggle and ultimately fail with your defense. You need to know the subject from every angle to ensure you are fully prepared for any question that may come your way.

4. Conclusion:

Reinforce your findings to conclude your defense. The finale of your presentation should focus on proving the work that has been done. You may need to recap on what has changed and remained unchanged, if is necessary.

5 . Listen:

Before you get defensive or recite a particular answer, make sure you truly understand the question being asked. Being a good listener is an important quality, because providing an inaccurate or off-topic answer will also weaken the validity of your paper.

Samphina Academy

Samphina Academy is an Online Educational Resource Center that is aimed at providing students with quality information and materials to aid them in succeeding in their academic pursuit.