The Fabrication Of A Single Face Pressurized Kerosene Cooker

Project and Seminar Material for Mechanical Engineering ME

Project and Seminar Material for Mechanical Engineering ME


Abstract


This project is concerned with the fabrication of as a single face pressurized kerosene cooker. The report shows the possible way in which the above mentioned can be designed, fabricated and maintained.

Its also shows the strength and properties of the materials it is made of.

Defects of the equipment can come through inability to maintain and inability to use well.

It can be due to irregular cleaning of pressurized parts, exposure to rain, moisture and sunlight as well as insufficient kerosene and air pressure in the tank before usage. Before fabricating, the properties of materials and kind of material involved are put into consideration.

The parts and its functions are described.


Table Of Content


  • Title page i
  • Certification page ii
  • Dedication iii
  • Acknowledgement iv
  • Abstract v
  • Table of content

Chapter One

  • Introduction

Chapter Two

  • Literature Review
  • 2.1 How the stove work

Chapter Three

  • Design Analysis

Chapter Four

  • 4.1 Material Selection
  • 4.2 Component Parts
  • 4.3 Description of the component part
  • 4.3 Constructional features of the stove

Chapter Five

  • 5.1 Method of Operation
  • 5.2 Maintenance
  • 5.3 Capacity
  • 5.4 Detection of kerosene shortage

Chapter Six

  • Cost Estimates
  • 6.1 Material cost Analysis
  • 6.2 Machine cost Analysis
  • 6.3 Labour cost Analysis

Chapter Seven

  • 7.1 Conclusion
  • 7.2 recommendation
  • references

Chapter One


Introduction

This project of fabrication of single face pressurized kerosene cooker is a copied design.

It is a manually operated type of stove, which has the capacity of supplying heat energy at high and low temperature. The type of stove so designed here do the industrial type with one burner.

Since the introduction of this pressurized kerosene cooker many effort has been made in order to enhance the ability to function well.

Thus we undertook this project design and fabrication of a single pressurized kerosene stove as a copped design from the popular Japan product (Regular Structural Stove) using locally available material of a 4mm (thickness) sheet metal.

Thus demonstrating the realization and importance of copy technology.


Get Complete Project Material

5,000 5000

The Complete Material Will Be Sent to You in Just 2 Steps

Quick & Simple…


Step One Purchase

Make Payment (Through Transfer) of ₦5,000 to the Account Below

Zenith BankAcc No: 1225513212
Samphina Academy
Current Account

Or CLICK HERE To Pay With Debit Card


FOR STUDENTS OUTSIDE NIGERIA
CLICK HERE To Purchase Material ($15)

Step Two Purchase

Send the Following Details on WhatsApp ( 08143831497) After Payment

  1. Payment Details

  2. TOPIC: The Fabrication Of A Single Face Pressurized Kerosene Cooker

The Complete Material Will Be Sent To You On WhatsApp After Receiving Your Details
T & C Apply


  Contact Our Help Desk


Need a Different Topic? Perform a Quick Search



List of Related Works

Click on Any Topic to Preview the Content

samphina.academy

Samphina Academy

Samphina Academy is an Online Educational Resource Center that is aimed at providing students with quality information and materials to aid them in succeeding in their academic pursuit.