Design And Implementation Of Remote Control Door Opener

Project and Seminar Material For Electrical Electronics Engineering EEE

Chapter One

1.0 Introduction

1.1 Background of Study

Security describes protection of life and property. There are doors to keep people out, key locks and chains reinforce the mode of security. Doors are being made of metals not just wood anymore. Influential persons in our society have bullet proof doors to ensure a good measure of security of self and family. The system has become necessary at this time when crime has remain on the ever increase, despite the efforts of the various security agents, it has equally becomes necessary to have control of access to some entrance, since it goes a long way to limit the accessibility of unauthorized persons in restricted areas. This has brought about the need to review the reliability of already existing systems and look into the possibility of creating better systems that are smarter and more secure. Hence, the design of a remote control door opener.

A remote control door opener system is an access control system that allows only authorized persons to access a restricted area, this system is best suitable for co-operate offices and home security. The design uses a 4017 decade counter based digital lock, it comprises of a small electronic unit which is fixed at the door entry to control the door mechanism, especially when the relay is energized it will drive the motor in clockwise direction for the door to open and anti-clockwise direction for the door to be closed. It is developed for a system to enable users to use only a customized remote to open doors at restricted zones.

1.2 Aim / Objectives

The aim of this project is to design and implement a remote control door opener. Therefore, the specific objectives of the project are as follows:

1. To design a suitable 5v power supply
2. To design a remote control door using TC4017 Decade counters
3. To Interface the remote transmitter using 555 timers
4. To Implement automatic Door control mechanism driving dc motor in both directions

1.3 Significance of the Study

The benefit of this project work cannot be overemphasized. This is because it would help to develop the ability of our potential and also increase our knowledge in electronic design. This design methodology offers security of lives and properties

This work will also benefit the economy as it help to reduce crime rate thereby affecting the economy positively. In commercial setting, this can be used as a revenue source. Finally, it will serve as basic technology advancement to students in engineering field of study since it will aid students who intends to carryout similar design.

1.4 Scope of the Project

The scope of this project is centered on design and implementation of a remote control door opener. This kind of project can also be used for different designs such as box, safe, gates, doors or garages.

Also, the remote control (RF) would access the door within the frequency range of 38kHz.

Furthermore, the scope will include in the design a door switch using a customized remote to open doors in order to avoid unauthorized persons from entering restricted areas.

1.5 Limitation of the Project

During the process of this project design, lots of difficulties were encountered that is:

1. Finance
2. Unavailability of some raw materials for the research work.
3. Time was another serious issue which was significant in the research required for this work.

1.6 Project Report Organization

The organization of this project report is well detailed and vast in its coverage because it covers all the activities encountered during the project design. Chapter One of this work took care of the Introduction, Background, Aims and objective, significance, scope, limitations and Project report organization. Chapter Two highlight on literature review where it reviews and discusses past work of other authors on the subject matter. Chapter Three highlight design methodology. Chapter Four highlight on the implementation and testing. Chapter Five is all about the conclusions problem encountered recommendation and cost of the project.

Design And Implementation Of Remote Control Door Opener

The complete material will be sent to you in just 2 steps.

Quick & Simple…

Make payment of ₦3,000: through USSD Transfer, Bank Mobile App, ATM Transfer, or POS Transfer to:

	Account No.: 0811003731
	Name: Samphina Academy
	Account Type: Current

Or Click Here to pay with Debit Card

Send the following details through Text Message or WhatsApp Messenger | +234-8143831497

• Payment Details 
• Email Address 
• Design And Implementation Of Remote Control Door Opener

The complete material will be sent to your email address after receiving your payment information | T & C Apply

  Contact Our Help Desk

You may also like:

Disclaimer

This research material “Design And Implementation Of Remote Control Door Opener” is for research purposes and should be used as a guide in developing your research project / seminar work. For no reason should you copy word for word (verbatim) as samphina.com.ng will not be liable for any who copied the material.

The aim of providing this material is to reduce the stress of moving from one school library to another all in the name of searching for research materials. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works. According to Austin Kleon “All creative work builds on what came before”.

samphina.com.ng is only providing this material “Design And Implementation Of Remote Control Door Opener” as a reference for your research. The paper should be used as a guide or framework for your own paper. The contents of this paper should be able to help you in generating new ideas and thoughts for your own research. Use it as a guidance purpose only.