Design And Implementation Of A Computerized Recycling System For Protecting The Green Environment

Project and Seminar Material for Computer Science and Computer Engineering

Project and Seminar Material for Computer Science and Computer Engineering


Our earth suffers a lot from the things that are tossed uselessly; these things might be advantageous to our society. Then again, communities across the country endure a lot of waste particularly plastic waste; this has led to environmental pollution and depletion of natural resources. Therefore, this research aims to achieve sustainable development and designing a computerized system to aid in the recycling of waste products. As part of the Nigeria’s vision 2020. The implementation of the Recycle site, will improve waste and plastics disposal in an environmentally positive manner. The proposed system was developed using the HTML & CSS, and the PHP and mySQL programming language for the client server.

Chapter One


1.1 Background Of The Study

According to Roch man, Browne, in the year 2012 alone, it was estimated that about 280 million tons of plastic has been produced worldwide. From that amount, about 130 million tons of the plastics were land filled or recycled. Of the remaining 150 million tons, plastic will find their place in daily lives of human being. Meanwhile, the rest of the plastic fraction find their final way as litters in the oceans or land filled. Thus, the plastic waste carries genuine natural risk to present day society since it is made up from a few poisonous synthetic concoctions, and subsequently plastic dirties soil, air and water ifa not properly managed or treated. Accordingly, when a large portion of the accessible plastic today is made up from non-biodegradable sources, land-filling by utilizing plastic would mean covering the destructive material for over a period until it naturally degrades. In their unique condition, any plastic materials would build the waste volume during area filling. However, their degradation rate and bulky in nature creates environmental risks tremendously. Besides, the plastic waste mass may hinder the ground water movement. Plastic waste may usually in the form of film and hard plastic may contains harmful metal based elements such heavy metal, at which when mixed up with water or rain water can impede soil and receive water.

Moreover, plastic trash can block the pace of permeation and in turns would fall apart the dirt fruitfulness on the off chance that it is blended with soil. Moreover, plastic waste which is mostly disposed into surface water, public drain, river or sea water can create imbalance of the water and aquatic life.

The idea of recycling began during the First and Second World Wars, when countries suffered from a severe shortage of some basic materials such as rubber, which led to the collection of these waste materials for reuse. After years, recycling became one of the most important methods for waste management; For many years, direct recycling by scrap producers was the basic form of recycling, but by the early 1990s, the focus was on indirect recycling, ie, the manufacture of waste materials to produce other products based on the same raw material as recycling of glass, paper, plastics, aluminum and other materials. Industry experts have found that if recycling programs are taken seriously, they can help reduce the cost of raw materials and operating costs, and improve their image as being guilty for environmental pollution.

After ten years of application of the idea the question about the effectiveness of the process and the best means to get rid of waste has appeared. They have discovered over time that the cost of remanufacturing is high compared to its advantages and returns. The recycled product is usually lower in quality than the primary product used for the first time; also it is not used for the same purposes as the primary product. However, the cost of manufacturing it is higher than the cost of manufacturing the primary product from its raw materials, making the recycling process economically illogical and energy wasting. Where, another method of waste disposal should be sought while at the same time non-renewable raw materials are not wasted. Some ideas already begun to emerge, such as using crushed glass in waste as an alternative to sand in street paving or trying to use waste to generate clean energy. In the future, many other ideas are expected to get rid of waste piles in a way that conserves the environment and does not waste energy. Green parties have emerged in many parts of the country, and many are aware of environmental awareness and a genuine desire to stop the drain of resources. A generation was emerging that knew new vocabulary such as the Ecological System, Global Warming, the Effect Green House, the ozone hole, recycling use, the ozone hole, recycling.

1.2 Statement Of The Study

Communities endure a huge amount of waste and this has promoted ecological pollution and depletion of natural resources, and the expansion of this negative phenomena resulting from the use of the wrong methods to get rid of these wastes and the negative consequences on public health and also suffer from plastic waste as it is one of the products manufactured from petrol, Which is used in many industries such as: making cups and dishes, but at the same time it does not decompose easily, it may take millions of years to decompose completely, so it is dangerous to the environment. The negative disposal of these wastes also affects the ozone layer, increasing global warming, increasing the temperature level in general, and burying some of the waste, which leads to soil spoilage, plant death and increases desertification rates.

Therefore the computerized recycling system for protecting green environment will promote the culture of recycling across nations around the world and show it importance to the environment and general public.

1.3 Motivation Of The Study

Where the statistics indicate the high per capita consumption will reach 1.39kg per person in 2018, indicating the high consumption of plastic materials, paper and other materials, which will increase the cost of burning and burying these materials and increase the environmental pollution resulting from the burning and will corrupt soil as a result of dumping of non-biodegradable materials. This will increase the percentage of desertification and increase the global warming, which led to the extinction and scarcity of many living creatures. Therefore, recycling processes should be taken seriously to reduce environmental problems and provide a less harmful environment for us and for future generations.

1.4 Aims And Objective Of The Study

The aim of the study is design and implement a computerized recycling system for protecting the green environment with the following objectives:

  1. Achieving part of the United Nations vision 2020 which aims to achieve environmental sustainability.
  2. Reducing environmental pollution caused by plastics materials, paper and cans.
  3. Reduce the human damages caused by pollution of ground and surface water and also soil pollution.


1.5 Definition Of Terms


Pollution is the introduction of contaminants into the natural environment that cause adverse change.

Green environment:

Green Environment relates to the concerns for environmental conservation and improved health of the environment.

Plastics Materials:

Plastic is material consisting of any of a wide range of synthetic or semi-synthetic organic compounds that are malleable and so can be molded into solid objects.


Convert to a system that is operated or controlled by computer.


(With reference to a chemical compound) break down or cause to break down into component elements or simpler constituents.

Clean energy:

Energy, as electricity or nuclear power, that does not pollute the atmosphere when used, as opposed to coal and oil, that do.


The action or process of converting waste into reusable material.

Chapter Five

Summary and Conclusion

5.0 Summary

The computerized recycling system for protecting the green environment is a major and important system to save our precious planet from climate change activities. The current system that has been in existence is not automated and cannot handle the current challenges facing our planet, in which also has many defects as mentioned earlier in section 3.3 of this research. The merits of this automated system over the existing one are as follows:

  1. Save our planet from climate change caused by not recycling used plastics can, paper, wears, burning of fossil fuel and many more.
  2. Accuracy
  3. Reliability
  4. Reduced paper work
  5. Speed in processing time
  6. It cannot be manipulated
  7. Simple process
  8. User’s friendliness with GUI

5.2 Recommendation

This work should not put a stop to research on making our planet earth a better place to live using technology as artificial intelligence, recycle machines at major stations across cities over the globe can be integrated to the technology used in this system.

Despite the fact that the system is a web based system, it can be re-developed into a mobile application running on android and IOS phones to easily make it available for anyone across the world to access and recycle their old properties recyclable. Also security measures should be put in place to avert web hackers and theft.

Also, we strongly recommend this software for anyone interested in recycling old or used properties into reusable items across the world.

5.3 Conclusion

The results of this study show the importance of recycling and its impact on the environment and the extent of community interest in this issue and their support. We have analyzed the use of a web based recycling system to help. We also designed the pages for the site (Home, Login, Registration, Products, etc.) for the computerized system, this site combines the recycler and the recycling institution through several specifications. The web based system will improve waste and plastics disposal in an environmentally positive manner.

Project Material Download

5,000 5000

The Complete Material Will Be Sent to You in Just 2 Steps

Quick & Simple…

Step One Purchase

Make Payment (Through Transfer) of ₦5,000 to Any of the Account Below

Access Bank PlcAcc No: 0811003731
Samphina Academy
Current Account
Zenith BankAcc No: 1225513212
Samphina Academy
Current Account
PalmPay Main LogoAcc No: 8143831497
Samphina Academy
Digital Account

Or CLICK HERE To Pay With Debit Card

CLICK HERE To Purchase Material ($15)
Make Payment of 120 GHS to 0553978005 | Douglas Cloud Osabutey | MTN MoMo

Step Two Purchase

Send the Following Details on WhatsApp ( 08143831497) After Payment

  1. Payment Details

  2. TOPIC: Design And Implementation Of A Computerized Recycling System For Protecting The Green Environment

The Complete Material Will Be Sent To You On WhatsApp After Receiving Your Details
T & C Apply

  Contact Our Help Desk

Need a Different Topic? Perform a Quick Search

List of Related Works

Click on Any Topic to Preview the Content

Samphina Academy

Samphina Academy is an Online Educational Resource Center that is aimed at providing students with quality information and materials to aid them in succeeding in their academic pursuit.