Design And Fabrication Of A Printing Machine

Project and Seminar Material for Mechanical Engineering ME

Project and Seminar Material for Mechanical Engineering ME


Abstract


Parameters on which clear prints depends were comprehensively investigated. The study revealed that clear print depends on the impressed pressure the working temperature and the gold foil print paper life expectancy.
Also studies were he manner of dependence of these parameters on prints impressed on sheets of varied thickness. The results of these investigation were utizlied in the design and fabrication of an operational manual printing machine using gold foil sheet depositor clear prints were impressed on papers during the new machine’s operation.


List Of Tables


  • TABLE 1 – Experimental determination of pressure for printing
  • TABLE 11- Effect of temperature on sharpness of print.
  • TABLE 111 – Description of (components) parts and materials use for them
  • TABLE 1v- Comparison of cost and properties of materials

List Of Figures


Description

  • Figure 1 sketch of alternative A
  • Figure 2. Sketch of alternative B.
  • Figure 3 sketch of alternative C
  • Figure 4 isomeric view of hot plate square housing
  • Figure 5 isometric view of type holder
  • Figure 6 &7 load and free body diagram of crank are (Handle) and rod.

List Of Symbols


  • A – Area
  • A – Acceleration
  • D – Maximum shaft diameter
  • d- minimum shaft diameter
  • e- efficiency
  • k – Thermal conductivity
  • c – Heat capacity
  • x – The pressure transmissibility of lever system (press x 1/duration )
  • t – Time
  • l – Length of shaft
  • m – Mass
  • m – Maximum bearding moment
  • p – Electric power
  • q – Quantity of heat

Table Of Contents


  • Title page ii
  • Letter of transmittal iii
  • Release iv
  • Approval page v
  • Dedication vi
  • Acknowledgement vii
  • Abstract viii
  • List of figures ix
  • List of tables x
  • List of symbols xi
  • Table of contents xii

Chapter One

  • 1.1 introduction 1
  • 1.2 literature review and data collection 2
  • 1.3 experimental determination of pressure for prating 3
  • 1.4 design specification 9

Chapter Two

  • 2.1 Design solutions 11
  • 2.2 Alternative A press foot printer 11
  • 2.3 Alternative B; crank arm (handle ) 14
  • 2.4 Alternative C; automatic (motorized) printer 17
  • 2.5 Comparison of alternative and choice 20

Chapter Three

  • 3.1 Design selection and analysis of parts of chosen alternative 22
  • 3.2 Theory of design/ design calculation 24
  • 3.3 The design of the shaft (Hollow) 26

Chapter Four

  • 4.1 construction of prototype 28
  • 4.2 general 28
  • 4.3 material selection 29
  • 4.4 sequence of construction and assembly 40

Chapter Five

  • 5.1 Testing of prototype (test – run) 40
  • 5.2 Evaluation of machine efficiency 40
  • 5.3 Operator’s manual 41
  • 5.4 Costing (cost analysis) 42
  • 5.5 Problems Encounter 45
  • 5.6 Conclusion 45
  • 5.7 Recommendation 46
  • Reference 48

Design And Fabrication Of A Printing Machine


Project Material Download

3,000 Naira


The complete material will be sent to you in just 2 steps.

Quick & Simple…


Step One Purchase

Make payment of ₦3,000: through USSD Transfer, Bank Mobile App, ATM Transfer, or POS Transfer to:

Access Bank PlcAccount No.: 0811003731
Name: Samphina Academy
Account Type: Current

Or Click Here to pay with Debit Card

FOR CLIENTS OUTSIDE NIGERIA:
Click Here to pay with Debit Card ($15)
GHANA – Make Payment of 60 GHS to MTN MoMo, 0553978005, Douglas Osabutey 

  PAY WITH CRYPTOCURRENCY


Step Two Purchase

Send the following details through Text Message or WhatsApp Messenger | +234-8143831497

  • Payment Details 
  • Email Address 
  • Design And Fabrication Of A Printing Machine

The complete material will be sent to your email address after receiving your payment information | T & C Apply


  Contact Our Help Desk


You may also like:

⚠️ Need a different topic? Perform a quick search



Get A Complete Business Plan For Any Business In Nigeria

Business Plan for Businesses in Nigeria

  Business Plans in Nigeria


Disclaimer


This research material “Design And Fabrication Of A Printing Machine” is for research purposes and should be used as a guide in developing your research project / seminar work. For no reason should you copy word for word (verbatim) as samphina.com.ng will not be liable for any who copied the material.

The aim of providing this material is to reduce the stress of moving from one school library to another all in the name of searching for research materials. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works. According to Austin Kleon “All creative work builds on what came before”.

samphina.com.ng is only providing this material “Design And Fabrication Of A Printing Machine” as a reference for your research. The paper should be used as a guide or framework for your own paper. The contents of this paper should be able to help you in generating new ideas and thoughts for your own research. Use it as a guidance purpose only.

Samphina Academy

Samphina Academy is an Online Educational Resource Center that is aimed at providing students with quality information and materials to aid them in succeeding in their academic pursuit.