The Design Of A 500watts Uninterruptible Power Supply With Voltage Leo Indicator [Inverter]

Project and Seminar Material For Electrical Electronics Engineering EEE

The Design Of A 500watts Uninterruptible Power Supply With Voltage Leo Indicator [Inverter]


Abstract


As new ideas unfold and technology become advanced with business increasingly being dependent on technology for their fundamental operation; the need for system availability is of paramount importance.

Uninterruptible power supply [INVERTER] maintain continuous supply of electric power to certain essential equipment that cannot be shut down unexpectedly. They are generally associated with telecommunication equipment, computer system and other facilities such as airport traffic controls system where even brief commercial power interruption could cause injuries or fatalities, serious business disruption in data loss.

The 500watts UPs is designed to be used in such situation. With its conversion design, providing clean square wave power to the critical load and with the battery, this UPs [Inverter] is ideal for small business and home PC that need adequate protection against power failure.


Table of Contents


  • Title page
  • Approval page
  • Dedication
  • Acknowledgement
  • Abstract
  • Table of contents

Chapter One

Project Overview

  • 1.1 Introduction
  • 1.2 Scope and specification
  • 1.3 System Architecture

Chapter Two

Literature Review

  • 2.1 Introduction
  • 2.2 Current Trends in UPs
  • 2.3 Implementation option
  • 2.4 Preference Technique

Chapter Three

  • 3.1 Working Principles of an Inverter
  • 3.2 Working Principle of some Device in an Inverter
  • 3.3 Table of Components used
  • 3.4 Conclusion.

Chapter One


Introduction

Standby power is an extreme necessity these days owing to bad quality of power supply. The present AC power lines are based in spike surges, transients, sags and noise. This result in failure of electronic equipment and without adequate protection; all electronic equipment is at a great risk.

The fundamental purpose of a UPs is to provide an uninterruptible source of power for the equipment it protects. For instance, an electric device plugged into the wall has only one source of power, thus if there is a blackout, the electricity is cut and the device obviously goes off immediately. A UPs changes all this equation by providing its equipment two sources of power. UPs are designed so that there is one source and another source that kicks in if the primary is disrupted, called the secondary power sources, and the battery contained within the UPs in the other.

While there are many less expensive methods one can employ to provide some degree of protection for ones PC (for example) from power problems, none of them c an insulate your system from trouble as well as good UPs with a voltage analyzer.

The idea behind a UPs is pretty obvious from the name. In addition to filtering, enhancing or modifying the utility power, special circuiting and batteries are used to prevent the PC (for example) from losing power during a disruption (black out) or voltage sap.


Scope and Specification

The project work is limited to the design of a standby UPs with a voltage LED indicator.

Complete Material Available


How To Get The Complete Material For The Design Of A 500watts Uninterruptible Power Supply With Voltage Leo Indicator [Inverter]


Project Material Download

3,000 Naira


The Complete Material will be Sent to You in Just 2 Steps

Quick & Simple…


Step One Purchase

Make a Mobile Transfer or POS Payment of ₦3,000 to any of the Account Below

Access Bank PlcAccount No.: 0811003731
Name: Samphina Academy
Account Type: Current
Zenith BankAccount No.: 1225513212
Name: Samphina Academy
Account Type: Current

Or CLICK HERE To Pay With Debit Card

FOR CLIENTS OUTSIDE NIGERIA
CLICK HERE To Pay With Debit Card ($15)
GHANA – Make Payment of 80 GHS to MTN MoMo, 0553978005, Douglas Osabutey 

Step Two Purchase

Send the Following Details on WhatsApp ( 08143831497) After Payment

  • Payment Details
  • Email Address 
  • The Design Of A 500watts Uninterruptible Power Supply With Voltage Leo Indicator [Inverter]

The Complete Material Will Be Sent To Your Email Address After Receiving Your Details
T & C Apply


  Contact Our Help Desk


⚠️ Need a different topic? Perform a quick search



Get A Complete Business Plan For Any Business In Nigeria

Business Plan for Businesses in Nigeria

  Business Plans in Nigeria


Disclaimer


This research material “The Design Of A 500watts Uninterruptible Power Supply With Voltage Leo Indicator [Inverter]” is for research purposes and should be used as a guide in developing your research project / seminar work. For no reason should you copy word for word (verbatim) as samphina.com.ng will not be liable for any who copied the material.

The aim of providing this material is to reduce the stress of moving from one school library to another all in the name of searching for research materials. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works. According to Austin Kleon “All creative work builds on what came before”.

samphina.com.ng is only providing this material “The Design Of A 500watts Uninterruptible Power Supply With Voltage Leo Indicator [Inverter]” as a reference for your research. The paper should be used as a guide or framework for your own paper. The contents of this paper should be able to help you in generating new ideas and thoughts for your own research. Use it as a guidance purpose only.

Samphina Academy

Samphina Academy is an Online Educational Resource Center that is aimed at providing students with quality information and materials to aid them in succeeding in their academic pursuit.