Construction Of A Fluidzed Bed Reactor

---

Abstract

---

The project is the construction of fluidised bed reactor. After a detailed research mild steel was chosen as the material of construction based on its inherent properties. The construction process entitles the marketing out of the sheet to the specified dimensions. This was followed by center punching and cutting. The sheets are then joined together after rolling by welding. Finally, surface treatment like painting was carried out to give it a brighter colour and durable property.

The dimension are:

• Area of upper Nozzle = 4.56m2
• Weir length of the nozzle = 0.16m
• Area of upper frustrum = 4.36m2
• Area of cylinder/vessel = 47.03m2
• Weir length of cylinder/vessel = 0.29m
• Area of the lower nozzle = 4.56m2
• Weir length of lower nozzle = 0.31m
• Area of the lower frustrum = 4.35m2
• Radius of the perforated bed = 0.15m
• Diameter of the perforation = 0.0251mm
• Ration of length to Diameter is 2.1
• The heat transfer coefficient of the material is 200w/m20C

The reactor constructed is a type of reactor that can be use to carry out a variety of multiphase chemical reaction example cracking of petroleum

---

Table Of Contents

---

• Title page – – – – – – – – i
• Letter of transmittal – – – – – – ii
• Approval page – – – – – – – – iii
• Dedication – – – – – – – – iv
• Acknowledgement – – – – – – – v
• Abstract – – – – – – – – – vi
• Table of contents – – – – – – – vii
• Nomenclature – – – – – – – – xi

---

Chapter One:

• Introduction
• 1.1 Background of the study – – – – 1
• 1.2 Statement of the problem – – – – 2
• 1.3 Purpose/Aims of the study – – – – 2
• 1.4 Scope and limitation of the study – – – 3
• 1.5 Method of construction of the study – – 5
• 1.6 Significance of the study – – – – – 7

---

Chapter Two:

• Literature Review
• 2.1 Reactor – – – – – – – – 8
• 2.2 Classification of reactor – – – – – 9
• 2.2.1 Reactor types – – – – – – 9
• 2.2.2 Principle type of reactor – – – – 10
• 2.2.3 Homogenous and hetrogenous reactor – – 10
• 2.2.4 Mode of operation – – – – – – 12
• 2.2.5 Reactor geometry (type) – – – – 13
• 2.3 Fluidised bed reactor – – – – – 14
• 2.3.1 Basic principle of fluidized bed – – – 19
• 2.3.2 Design procedure – – – – – – 20
• 2.3.3 Fluidised bed reactor for mixing gas – – 22
• 2.4 Fluidisation – – – – – – – 24
• 2.5 Mode of operation of fluidised bed reactor – 26
• 2.6 Advantages of fluidized bed reactor – – 28
• 2.7 Disadvantages of fluidised bed reactor – – 29
• 2.8 Uses of fluidized bed reactor. – – – – 32

---

Chapter Three:

• Selection Of Material
• 3.1 Engineering materials – – – – – 34
• 3.1.1 Classification of engineering material – – 34
• 3.1.2 Metals and alloys – – – – – – 36
• 3.1.3 Ceramic and organic polymer – – – 36
• 3.1.4 Organic materials – – – – – – 36
• 3.1.5 Inorganic materials – – – – – 36
• 3.1.6 Biological materials – – – – – 36
• 3.1.7 Biomaterial – – – – – – – 36
• 3.1.8 Advance material – – – – – – 37
• 3.1.9 General properties of engineering materials – 37
• 3.2 Material selected – – – – – – 43
• 3.21 Factors considered for the selected of material 44
• 3.22 Reason for the material selected – – – 45

---

Chapter Four:

• Constructional Procedure
• 4.1 Tools and materials used – – – – 47
• 4.2 Steps of fabrication process – – – – 47
• 4.3 Precaution taken during fabrication – – 49

---

Chapter Five

• 5.0 Discussion – – – – – – – 51
• 5.1 Conclusion – – – – – – – 53
• 5.2 Recommendation – – – – – – 54
• References – – – – – – 56

---

Nomenclature

---

•  = Pie ca constant with value of 22/7
• R = Radius of the cylinder/vessels (in inches)
• H = Height of a cylinder/vessel
• L = Length of a rectangular plate
• W = Width of the rectangular plate used
• R2 = Radiius of the upper and lower nozzle
• H2 = Height of the upper and lower nozzle
• L2 = Length of the rectangular of plate used

---

How To Get The Complete Material For “Construction Of A Fluidzed Bed Reactor“

---

The Complete Material Will Be Sent to You in Just 2 Steps

Quick & Simple…

---

Make Payment (Through Transfer) of ₦3,000 to Any of the Account Below

	Acc No: 0811003731
	Samphina Academy
	Current Account

	Acc No: 1225513212
	Samphina Academy
	Current Account

	Acc No: 8143831497
	Samphina Academy
	Digital Account

Or CLICK HERE To Pay With Debit Card

---

FOR STUDENTS OUTSIDE NIGERIA

CLICK HERE To Purchase Material ($15)

FOR GHANIAN STUDENTS

Make Payment of 80 GHS to 0553978005 | Douglas Osabutey | MTN MoMo

---

Send the Following Details on WhatsApp ( 08143831497) After Payment

1. Payment Details
   

   ---

2. TOPIC: Construction Of A Fluidzed Bed Reactor

The Complete Material Will Be Sent To You On WhatsApp After Receiving Your Details
T & C Apply

---

  Contact Our Help Desk

---