Automobile Motor Vehicle Construction

Project and Seminar Material for Mechanical Engineering ME

Automobile Motor Vehicle Construction


Abstract


This work is an attempt evolve a quicker and easier method of achieving Transportation. This will no doubt save considering human labour and time wasted involved in traditional manual method of transportation.

To achieve this, preliminary experiment was first carried out to determine the optimum speed of the motor vehicle. Various design alternative s for achieving the design solution were sythesized and a choice of an economic method which would satisfy the objective was made. Base on the principles guiding the performance of the motor vehicle, the dimensions and sizes of the various components were established.

Appropriate materials were subsequently selected and fabricated to require sizes. The motor vehicle was then assembled and tested.

After testing, it was found to perform efficiently this satisfying the objective for which it was designed.


Chapter One


Introduction

Automobile motor vehicle construction contributed a lot towards the economy of life in such a way that transportation is easier and quicker, with this we determined the distance man could travel, even without load.
This motor vehicle is basically designed for domestic, and industrial use. This motor vehicle designed to operate using internal construction engine, which is the most convenient source of power so far developed for driving road vehicles, which drives its power from the burning of fuel and air inside the engine cylinder.

The internal combustion engine (I.C.E) converts the chemical energy in fuel into heat energy and heat energy into mechanical energy. The heat energy is produced by a chemical reaction between the different elements of fuel and air in other ward burning. This burning of fuel and air takes place inside sealed to expand in all directions. This expansion of gases caused the only movable object (the piston) in the sealed chamber to move down, hence transferring the power produced in the cylinder to the crankshaft of the engine and then creating mechanical energy.


The Objective of Motor Vehicle Construction

They are general objective of motor vehicle construction.

  1. First, understand the historical and technical development of motor vehicle
  2. Second objective is to understand the fundamental cycles of operation of he period and internal combustion engines.
  3. Third objective is to know the constructional processes of motor vehicle.
  4. Fourth objective is to understand the general principles of the transmission system of vehicle bodies. In order to achieve this we have to know the braking system and their operation principle and understanding the principles of steering mechanisms.

Chapter Six


Conclusion and Recommendation

6.1 Conclusion

This very project, we believe that the write up has all, the basic information on material and process of constructing motor vehicle.

It also serves as a guide to student and any individual who is technologically inclined when embarking on this type of project.

Appropriate materials were subsequently selected and fabricated to required sizes, the motor vehicle was then assembled and tested, it was found to perform efficiently thus satisfying the objective for which it was designed.
Finally, it was also designed and build to have a high portability, durability, flexibility with minum maintenance cost.


6.2 Recommendation

The opportunities of an automotive technologist are almost unlimited. this can be modified, if government could help and build up a standard institute with standard machines for students who have the knowledge of Automotive Motor Vehicle Construction, to develop the skills and also help then financially to enable them achieve their aims and objectives with this the job of automotive technologist can be a stepping stone to greater things.

Finally, cost of production of this work can be reduced if the factory for the production of materials and machines for producing motor engine, exle, and gearbox etc. are being located in our country.


Project Material Download

5,000 5000

The Complete Material Will Be Sent to You in Just 2 Steps

Quick & Simple…


Step One Purchase

Make Payment (Through Transfer) of ₦5,000 to Any of the Account Below

Access Bank PlcAcc No: 0811003731
Samphina Academy
Current Account
Zenith BankAcc No: 1225513212
Samphina Academy
Current Account

Or CLICK HERE To Pay With Debit Card


FOR STUDENTS OUTSIDE NIGERIA
CLICK HERE To Purchase Material ($15)
FOR GHANIAN STUDENTS
Make Payment of 120 GHS to 0553978005 | Douglas Cloud Osabutey | MTN MoMo

Step Two Purchase

Send the Following Details on WhatsApp ( 08143831497) After Payment

  1. Payment Details

  2. TOPIC: Automobile Motor Vehicle Construction

The Complete Material Will Be Sent To You On WhatsApp After Receiving Your Details
T & C Apply


  Contact Our Help Desk


Need a Different Topic? Perform a Quick Search



List of Related Works

Click on Any Topic to Preview the Content

samphina.academy

Samphina Academy

Samphina Academy is an Online Educational Resource Center that is aimed at providing students with quality information and materials to aid them in succeeding in their academic pursuit.